 |
DUAL SET POINT (WINDOW)
ALARM BOARD |
 |
|
|
|
 
|
The DSP-1 is designed to monitor critical sensor data from
a sensor amplifier/conditioner device such as the
TMO-1 or TMO-2.
The window is normally associated with signals such as below
normal (yellow), go range or
acceptable (green), and above acceptable
(red). Status is provided by output
relays as well as LED's. The window
is set by high and low potentiometers with
set values measurable at high and low test pins. A ground test pin is
provided
for measurement convenience. Output relays can be used to drive larger external
alarm devices or to halt
the process or activity that is causing the unacceptable
level. TMO-1 signal amplifier/conditioner can be mounted to
the DSP-1 via four
standoffs (provided) to create a single unit powered
by the same power supply.
|
|
|
| |
SPECIFICATIONS |
|
|
|
|
| |
| |
Alarm
Setting: |
2-(High
and Low) |
|
| |
Status
Levels: |
3-(low, Go and High) |
|
| |
Alarm
Range: |
0 to 10 VDC |
|
| |
Alarm
Response: |
Less than 15 ms |
|
| |
Alarm
Setting: |
Via external voltimeter |
|
| |
Power: |
12 VDC / 100 mA
max |
|
| |
Relay
Rating: |
2 A @ 100 VAC or
24
VDC, contact resistance
50 Mohm |
|
| |
Dimensions: |
3"L x 2.6"W x 0.6"H |
|
|
|
 |
|
 |
|
 |
|
My Account |
My Cart | 
My Order Status 