The LBM Series (Load Button) load cells
are offered
for compression only applications
where space is
limited. This load button is a
direct replacement for
many of the same type
and bolt patterns currently
used
in the
industry. The matching surface must be
flat
and
at least 2 inches in diameter. The loading
diameter is
slightly convex for accurate load distribution.
Eight
threaded mounting holes are provided on the bottom
surface for fastening
down from beneath. These
sensors are
manufactured from heat treated 17-4ph
stainless steel, and
the sensing element incorporates bonded foil strain gages
of the highest quality. They are sealed for protection against
most industrial
environments.
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.15% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.005% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Deflection Inches:
0.002 @ R.O.
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
Wiring Color Code (WCC1)
4 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
The LBM Series (Load Button) load cells
are offered
for compression only applications
where space is
limited. This load button is a
direct replacement for
many of the same type
and bolt patterns currently
used
in the
industry. The matching surface must be
flat
and
at least 2 inches in diameter. The loading
diameter is
slightly convex for accurate load distribution.
Eight
threaded mounting holes are provided on the bottom
surface for fastening
down from beneath. These
sensors are
manufactured from heat treated 17-4ph
stainless steel, and
the sensing element incorporates bonded foil strain gages
of the highest quality. They are sealed for protection against
most industrial
environments.
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.15% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.005% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Deflection Inches:
0.002 @ R.O.
Wiring Color Code (WCC1)
4 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
About Us
Smart Sensors
