Our LPU Series are low profile,
universal
tension or compression "pancake" type load cells.
They are available
in 14 ranges from 100 lbs.
through 50,000 lbs. Hold down bolt holes are
provided
through the outer diameter and a
threaded hole provided through the center for
pushing or pulling from either end. The ALB load
buttons located in our accessories
section, are
ideal for compression applications. The LPU Series
are made from
17-4ph heat treated stainless steel.
The sensing element incorporates bonded
foil strain
gages of the highest quality and are sealed for
protection against
most
industrial environments.
The Load Cells below come with Calibration in Compression
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
ONE AMP-T6 NEEDED PER LPU SERIES LOAD CELL
SPECIFICATIONS
Rated Output (R.O.):
3 mV/V nominal
Nonlinearity:
0.1% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect
on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.001% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Calibration Included:
Compression
Optional Calibration:
Tension
DIMENSIONS (INCHES)
MODEL
CAPACITY
LBS.
D
H
F
G
K
J
T
LPU-100
100
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-250
250
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-500
500
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-1K
1,000
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-2K
2,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-3K
3,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-4K
4,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-5K
5,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-7.5K
7,500
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-10K
10,000
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-15K
15,000
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-20K
20,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
LPU-30K
30,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
LPU-50K
50,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
The Load Cells below come with Calibration in Compression
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
ONE AMP-T6 NEEDED PER LPU SERIES LOAD CELL
Wiring Color Code (WCC2)
6 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
Our LPU Series are low profile,
universal
tension or compression "pancake" type load cells.
They are available
in 14 ranges from 100 lbs.
through 50,000 lbs. Hold down bolt holes are
provided
through the outer diameter and a
threaded hole provided through the center for
pushing or pulling from either end. The ALB load
buttons located in our accessories
section, are
ideal for compression applications. The LPU Series
are made from
17-4ph heat treated stainless steel.
The sensing element incorporates bonded
foil strain
gages of the highest quality and are sealed for
protection against
most
industrial environments.
SPECIFICATIONS
Rated Output (R.O.):
3 mV/V nominal
Nonlinearity:
0.1% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect
on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.001% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Calibration Included:
Compression
Optional Calibration:
Tension
DIMENSIONS (INCHES)
MODEL
CAPACITY
LBS.
D
H
F
G
K
J
T
LPU-100
100
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-250
250
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-500
500
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-1K
1,000
3.0
1.0
6
2.25
.28
.625
3/8-24 UNF
LPU-2K
2,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-3K
3,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-4K
4,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-5K
5,000
3.5
1.0
6
2.63
.34
.775
1/2-20 UNF
LPU-7.5K
7,500
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-10K
10,000
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-15K
15,000
5.5
1.8
8
4.50
.41
1.450
1-14 UNS
LPU-20K
20,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
LPU-30K
30,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
LPU-50K
50,000
6.0
1.8
8
4.88
.53
2.125
1 1/2-12 UNF
Wiring Color Code (WCC2)
6 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
The Load Cells below come with Calibration in Compression
About Us
Smart Sensors
