We designed the SW0 Series Load Cell as an
economical
solution for applications
that require
force
measurement or load feedback in both
tension
and compression
with good output
(millivolt)
compliance. When applied as an in
line load
link
or base mounted, the SW0 Series
offers good side
load rejection.
Ranges from
1,000 lbs. through
3,000 lbs. are anodized
aluminum and ranges
5,000 lbs. through
50,000 lbs. are made from
17-4ph heat treated
stainless
steel. The sensing
element incorporates
bonded foil strain gages of
the
highest quality and
are sealed for protection
against most industrial
Environments.
The Load Cells below
come with Calibration in Compression
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
ONE
AMP-T6 NEEDED PER
(SWO 20K - 50K) LOAD CELLS
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.1% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.005% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Calibration Included:
Compression
Optional Calibration:
Tension
DIMENSIONS (INCHES)
MODEL
CAPACITY
LBS.
H
W
SQ.
THREAD
THREAD
DEPTH
NATURAL RINGING
FREQUENCY HZ
DEFLECTION
WT. LBS.
SW0-1K
1,000
2.25
1.230
3/8-24 UNF
0.400
3,500
0.003
0.3
SW0-2K
2,000
2.25
1.230
3/8-24 UNF
0.400
5,000
0.003
0.3
SW0-3K
3,000
3.00
1.480
1/2-20 UNF
0.500
5,000
0.003
0.6
SW0-5K
5,000
3.00
1.425
3/4-16 UNF
0.750
5,000
0.003
1.9
SW0-10K
10,000
3.00
1.925
3/4-16 UNF
0.750
6,500
0.003
1.9
SW0-20K
20,000
3.85
1.925
1-14 UNS
0.970
6,500
0.006
4.3
SW0-30K
30,000
4.75
2.925
1 1/4-12 UNF
1.250
8,000
0.006
10
SW0-50K
50,000
5.50
2.925
1 1/2-12 UNF
1.500
9,500
0.006
12
The Load Cells below
come with Calibration in Compression
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
ONE
AMP-T6 NEEDED PER
(SWO 20K - 50K) LOAD CELLS
Wiring Color Code (WCC1)
4 Conductor
SWO-1K through 10K
Internal Temperature Compensation and Balance Network Not Shown
Wiring Color Code (WCC2)
6 Conductor
SWO-20K through 50K
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
We designed the SW0 Series Load Cell as an
economical
solution for applications
that require
force
measurement or load feedback in both
tension
and compression
with good output
(millivolt)
compliance. When applied as an in
line load
link
or base mounted, the SW0 Series
offers good side
load rejection.
Ranges from
1,000 lbs. through
3,000 lbs. are anodized
aluminum and ranges
5,000 lbs. through
50,000 lbs. are made from
17-4ph heat treated
stainless
steel. The sensing
element incorporates
bonded foil strain gages of
the
highest quality and
are sealed for protection
against most industrial
Environments.
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.1% of R.O.
Hysteresis:
0.1% of R.O
Nonrepeatability:
0.05% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.005% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Calibration Included:
Compression
Optional Calibration:
Tension
DIMENSIONS (INCHES)
MODEL
CAPACITY
LBS.
H
W
SQ.
THREAD
THREAD
DEPTH
NATURAL RINGING
FREQUENCY HZ
DEFLECTION
WT. LBS.
SW0-1K
1,000
2.25
1.230
3/8-24 UNF
0.400
3,500
0.003
0.3
SW0-2K
2,000
2.25
1.230
3/8-24 UNF
0.400
5,000
0.003
0.3
SW0-3K
3,000
3.00
1.480
1/2-20 UNF
0.500
5,000
0.003
0.6
SW0-5K
5,000
3.00
1.425
3/4-16 UNF
0.750
5,000
0.003
1.9
SW0-10K
10,000
3.00
1.925
3/4-16 UNF
0.750
6,500
0.003
1.9
SW0-20K
20,000
3.85
1.925
1-14 UNS
0.970
6,500
0.006
4.3
SW0-30K
30,000
4.75
2.925
1 1/4-12 UNF
1.250
8,000
0.006
10
SW0-50K
50,000
5.50
2.925
1 1/2-12 UNF
1.500
9,500
0.006
12
Wiring Color Code (WCC1)
4 Conductor
SWO-1K through 10K
Internal Temperature Compensation and Balance Network Not Shown
Wiring Color Code (WCC2)
6 Conductor
SWO-20K through 50K
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
The Load Cells below
come with Calibration in Compression
About Us
Smart Sensors
