Our THA Series thru-hole load cells offer an
outside
diameter of 1.00 inches
and up to two
different thru-hole
diameter options per capacity
range. These
load cells are
manufactured from
heat treated 17-4 ph stainless steel.
The sensing
element incorporates bonded foil strain gages
of
the highest quality and are
sealed for protection
against
most industrial environments.
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
THA-100-P
Capacity: 100 lbs
Thru Hole Load Cell
$450
THA-250-P
Capacity: 250 lbs
Thru Hole Load Cell
$450
THA-500-P
Capacity: 500 lbs
Thru Hole Load Cell
$450
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.25% of R.O.
Hysteresis:
0.25% of R.O
Nonrepeatability:
0.1% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.01% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Deflection Inches:
0.002 @ R.O.
MODEL
CAPACITY
AVAILABLE INSIDE HOLE DIAMETERS
THA-50
50 LBS.
-P,
-Q
THA-100
100 LBS.
-P, -Q
THA-250
250 LBS.
-P,
-Q
THA-500
500 LBS.
-P, -Q
INSIDE HOLE DIAMETER DIMENSIONS
-P
-Q
NOMINAL
HOLE DIA.
1/8"
3/16"
ACTUAL HOLE DIA.
.128
.193
Order Code Model
Capacity Range
Description
Price
Quantity
Add to Cart
THA-100-P
Capacity: 100 lbs
Thru Hole Load Cell
$450
THA-250-P
Capacity: 250 lbs
Thru Hole Load Cell
$450
THA-500-P
Capacity: 500 lbs
Thru Hole Load Cell
$450
Wiring Color Code (WCC1)
4 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
$395
»More info
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD
INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG AND PLAY DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
0 to ±10VDC OUTPUT
$375
»More info
TMO-2A LOAD CELL SIGNAL CONDITIONER
STAND ALONE / BENCH TOP
AMPLIFIER / CONDITIONER MODULE
4-20mA OUTPUT
$425
»More info
PSMR LOAD CELL POWER
SUPPLY
4 TO 15 VDC POWER SUPPLY
MODULE
$160
»More info
PSM-F10 LOAD CELL POWER
SUPPLY
10 VDC FIXED POWER SUPPLY
MODULE
$158
»More info
THRU-HOLE LOAD CELL COMPRESSION ONLY (1.00 O.D.)
THA SERIES
CAPACITY RANGES: 50, 100, 250, 500 LBS.
Our THA Series thru-hole load cells offer an
outside
diameter of 1.00 inches
and up to two
different thru-hole
diameter options per capacity
range. These
load cells are
manufactured from
heat treated 17-4 ph stainless steel.
The sensing
element incorporates bonded foil strain gages
of
the highest quality and are
sealed for protection
against
most industrial environments.
SPECIFICATIONS
Rated Output (R.O.):
2 mV/V nominal
Nonlinearity:
0.25% of R.O.
Hysteresis:
0.25% of R.O
Nonrepeatability:
0.1% of R.O.
Zero Balance:
1.0% of R.O.
Compensated Temp. Range:
60° to 160°F
Safe Temp. Range:
-65° to 200°F
Temp. Effect on Output:
0.005% of Load/°F
Temp. Effect on Zero:
0.01% of R.O./°F
Terminal Resistance:
350 ohms nominal
Excitation Voltage:
10 VDC
Safe Overload:
150% of R.O.
Deflection Inches:
0.002 @ R.O.
MODEL
CAPACITY
AVAILABLE INSIDE HOLE DIAMETERS
THA-50
50 LBS.
-P,
-Q
THA-100
100 LBS.
-P, -Q
THA-250
250 LBS.
-P,
-Q
THA-500
500 LBS.
-P, -Q
INSIDE HOLE DIAMETER DIMENSIONS
-P
-Q
NOMINAL
HOLE DIA.
1/8"
3/16"
ACTUAL HOLE DIA.
.128
.193
Wiring Color Code (WCC1)
4 Conductor
Internal Temperature Compensation and Balance Network Not Shown
CAL-TEDS Plug & Play Option
AD9
(9 PIN "D" Series) Connector attached to the
end of a Load Cell or Torque sensor cable with a TEDS
(Transducer Electoric Data Sheet) EPPROM. Used with
a Smart Plug & Play IEEE 1451.4 Compliant instrument, (shown on right), the Load Cell and Instrument will
self calibrate. This option is a real time saver. »Learn more about Plug & Play Smart Sensors
SSI LOAD CELL DISPLAY
SMART PLUG & PLAY HAND-HELD INDICATOR WITH DATA LOGGING IEEE 1451.4 COMPLIANT
$675
»More info
DPM-3 LOAD CELL DISPLAY
SMART PLUG & PLAY
DIGITAL
PANEL MOUNT LOAD CELL METER
IEEE 1451.4 COMPLIANT
About Us
Smart Sensors
